Wednesday, July 1, 2015

Create Stained Glass Pattern

Stained Glass is just one of many dying arts. However it is building a come back. Designs may be modern, traditional, realistic or abstract. Learn how to make your own stained glass design. What should be considered when drawing up a pattern. Leaded or copper foil panels may be fitted inside a wooden frame or enclosed in a double glazing unit, in place triple glazing a window. Free Hanging pieces may also be made, like mirrors, sun-catcher, candle holders, clocks, wall decorations and many other.

Before you begin a pattern it is just a good idea to understand some in the restrictions that happen to be specific to using the services of glass in both the leaded or copper foil methods. When your pattern is complete, and able to be made you can contact me via my website specifics of which might be found at the conclusion of the article
  1. Try in order to avoid a cross roads (X) or lines which are straight across in one side to a new in your pattern specifically for copper foil because this would be a some weakness in the finished piece. (this may not be so essential for lead work, and lots of traditional patterns do include these shapes, yet it's still safer to be avoided when possible).
  2. Try to prevent internal right angels (or sharper as inside letter V). as being the glass would most likely crack spreading on the point of the best angle. Therefore there ought to be line running from any points (like the letter Y).
  3. Try to refrain from doing a pattern with excessive detail. This is especially necessary for leaded serve as if the waste glass are far too small, they're not going to be seen as a result of lead. Think will the appropriate glass add the detail personally.
  4. The more detail there is certainly, the larger the piece has to be. This will possibly not make the piece harder to produce, unless it is extremely large, then handling the massive sheets of glass can simply make it plain awkward.
  5. Some with the pattern will likely be lost as a result of it being covered by the lead or copper foil (an increased amount are going to be lost whenever using lead than whenever using copper foil). the exact amount lost is dependent upon the thickness' used. For a piece A4 size, 8 or 10 mm lead is enough but thicker lead my need for larger pieces, or round the edge. Rather than detracting from your pattern, it may be a feature within a well planned pattern.
Things that you'll need for pattern making include: Paper (lining paper is helpful as if it gets wet once the piece is now being made it will not likely disintegrate), tracing paper/acetate, pencil, marker pen, ruler, eraser, ruler or tape measure determined by size. A true stained glass designer will be able to create a pieces having a variety of methods. These include:
  • Creating a pattern to suit existing panels or windows.
  • Creating a pattern from photo's.
  • Adapting existing patterns.
  • Working from a concept.
Before beginning the pattern for just a fitted piece the size ought to be determined, the obvious way to do this is with two methods.
  1. Measure the opening to tight fit (the undoubtedly are a behind the beading which the glass will match) across several points, height and width.
  2. Place paper in the area and draw throughout the area of tight fit.
Using those two methods ensures how the pattern will be the best size and shape (the opening most likely are not truly rectangular or square) Next it is just a good idea to get a line 5mm in from 2 sides (this will give for easy fitting along with a little bit of room for error if the piece will be made). align the remaining 2 sides.The pattern can the be drawn in the interior lines.

Creating a pattern to fit existing panels or windows


Is the place where the brand new stained glass piece planning to go the identical size just like any existing ones? If so an effective way to launched a pattern could well be with tracing paper, or even do a rubbing (as if you were a young child doing leaf rubbings) If not:
  • Take photo's on the existing panels so you know what you are accommodating.
  • Draw a grid to scale over their photo as well as on the paper the pattern will probably be drawn on, (this is simply 2 lines to divide into quarters, or maybe a grid with a lot more lines dependant upon the detail) this will assist keep the pattern to scale and information on the pattern set up.
  • Keep in your mind the new piece might not be the same shape and pattern details needs to be stretched or squashed
  • Start to draw in the specifics of the pattern in, while using the gridded photo for reference.

Creating a pattern from photos


Artistic licence ought to be used for colours, shapes and backgrounds.
  • Print your photo as near to the size and style wanted as it can be. If the photo is not printed on the exact size. Draw a grid to scale over the photo and also on the paper the pattern will probably be drawn on, (this might be simply 2 lines to divide into quarters, or maybe a grid with a lot more lines dependant upon the detail) this will help to keep the pattern to scale and information on the pattern in position.
  • look for the photo that has a critical eye. What detail could be missed out (whether textured or patterned glass can also add it, i.e. regarding fur in the animal).
  • Trace on the lines that will probably be kept that has a marker pen.
  • should the highlighted sections conform using the restrictions of using the services of glass, or even then add any extra lines which are needed, or alter shapes slightly.
  • When happy using the pattern trace on the altered image as well as the pattern is completed.

Adapting existing patterns


Pattern books could be very useful but there can be certain facets of a pattern which you don't like, or might just want to alter. This may be particularly true for free hanging pieces as being the shape is usually altered by at a disadvantage sections from your edges, or interest added by missing bits out in the middle (do not weaken the piece make certain that each bit has no less than 2 points of contact). Alternatively extra pieces could be added for greater detail or interest.
  • Photo copy or trace the pattern
  • Place tracing paper above the pattern and draw on the aspects that happen to be wanted, and changing any details which can be required.

Working from a thought (this needs the best amount of drawing skill)


It could be a very detailed and specific idea (I like the vista from my garden that features a view of Criffel, together with the trees along with the fields) or vague (i.e. I like hills and sunsets). In the first instance it can be advisable to require a photo for you to use. Whereas within the second instance a tad bit more questioning may need (do you live near a specific hill that could have inspired you, if you do then it could be far better to include the shape from the hill, in any other case just a general hill shape could possibly be fine make use of.

  • If the piece is really a fitted piece continue with the guideline lines mentioned earlier. For free hanging decide on the dimensions.
  • Roughly sketch out of the design, unless you are happy together with the way it looks
  • View the design using a critical eye to see if your design fits in together with the restrictions. Asking a 2nd person to view the style (telling them prefer) could be a great idea, as aspects is often missed.
  • Alter anything that must be altered.

After you learn to create stained glass pattern, also you can learn how to make stained glass and tips to apply it to your home that can be seen in www.iiparabotan.com. This website is good for you who decorating their home for reference, because full of information about home decor . See you next time!

No comments:

Post a Comment